Minn Kota

Electric Boat Motors by Minn Kota

Electric Boat Motors by Minn Kota

Minn Kota offers a wide range of electric boat motors for freshwater or saltwater conditions. Electric boat motors by Minn Kota are available in different strengths (measured in pounds thrust), different shaft lengths for different sized boats, as well as bow mount, transom mount and engine mount.

The best electric boat motors for Australia’s conditions are the saltwater “Riptide” range by Minn Kota. They have fully encapsulated electronics, sacrificial anodes and indestructible composite shafts which are impervious to the corrosive effects of saltwater. There are 4 variants of the Riptide saltwater series which are described below. All “Riptide” saltwater engines come with a 2 year warranty.

See our full range online here!

Should you require information on any of the freshwater models please give our Accessories department a call on (08) 9309 4200 (7 days) or email accessories@allboatbusiness.com.au

 


 

 

RIPTIDE SALTWATER TRANSOM MOUNT
SERIES

The superior durability and long lasting performance of the all new and improved Riptide is also available for the back of the boat. All our transom mount models are 12 volt and range from 40 to 55 lbs thrust. They feature our enhanced corrosion protection, ’sacrificial anode’ system and all the rugged reliability you expect from Minn Kota. All in an exciting new look. Why settle for anything less? Get a Riptide and get the very best.

SACRIFICAL ANODE

All Riptide trolling motors (transom mount and bow mount) feature a sacrificial zinc anode to fight galvanic corrosion. The replaceable anode is conveniently mounted on the prop hub and provides for better protection and longer motor life.

STAINLESS STEEL HARDWARE

Provides an extra measure of durability and corrosion resistance while maintaining a clean, sharp appearance.

COOL, QUIET POWER

Minn Kota motors feature larger brushes and commutators to provide for cooler, more quite operation. Minn Kota’s unique bearing system produces a motor with low rpm/high torque to cut down on fish spooking noise…so quiet they’ll never hear you coming.

MAXIMIZER (RT55 Models only)

Conventional speed coil technology delivers a constant, steady flow of power to the motor, regardless of speed setting. The result is wasted power and excessive heat. Minn Kota variable speed motors utilise a system that delivers the precise amount of power needed at any speed setting. The result is five times longer run time on a single charge for more hours on the water.

URETHANE ENCAPSULATED ELECTRONICS

All Riptide control boards (transom mount and bow mount) are fully encapsulated in marine grade urethane to form an impregnable barrier against the destructive effects of saltwater.

INDESTRUCTIBLE COMPOSITE SHAFTS

Better than steel, particularly in saltwater. Will not bend, kink, rust or corrode.

Guaranteed for life. Standard on all Riptide transom mount and bow mount models.

TILT TWIST TILLER CONTROL

Puts natural outboard convenience in the palm of your hand. The RT55 series has full variable control and the RT40 and RT50 have 5 forward settings and 3 reverse

MODELS

 RT40 – 12 volt, 40lb thrust, 36″ shaft -

RT50 – 12 volt, 50lb thrust, 42″ shaft -

RT55 – 12 volt, 55lb thrust, 36″ shaft -

 RT55 – 12 volt, 55lb thrust, 42″ shaft -

For questions and ordering with phone the accessories department (08) 9309 4200 (7 days) or email accessories@allboatbusiness.com.au

 


RIPTIDE BOWMOUNT POWERDRIVE SERIES

 

Get optimized saltwater performance with Riptide’s re-engineered electric steer control, new deploy-assist lever, and a host of features that set the standards for power and control. There are 2 by 12 volt models and 2 by 24
volt models which give a huge 70lb thrust.

DEPLOY ASSIST LEVER

Riptide Powerdrive’s new deploy assist lever puts you in motion and in pursuit of fish quickly and easily. Simply depress the lever to deploy the motor and you’re ready to go. When it’s time to move, it stows easily and securely
– ready for action again as soon as you are.

CO-PILOT

Give yourself the freedom to operate from anywhere on the boat with the CoPilot hand held remote control. Optional on both the Riptide RT55 and RT70 motors. (See just below). It’s total control in the palm of
your hand.

AUTO PILOT

Trade up to Minn Kota’s patented AutoPilot navigation system. Spend less time steering your boat and more time catching fish. Simply put, AutoPilot keeps your pursuit of trophy fish headed in the right direction. The Auto Pilot
is standard on one of the RT70’s and one of the RT55’s.

DIGITAL MAXIMIZER

Up to five times longer run time on a single charge. Standard on all 4 Riptide Powerdrive Bowmount models.

WIRELESS FOOT PEDAL

A corded foot pedal is standard on both the RT55 models. Foot pedals offer precise speed adjustment, right/left steering, and both momentary and constant On/Off. It is available as an option in a wireless configuration.

MODELS

RT55 – 12 volt, 55lb thrust, 48″ shaft, foot pedal -

RT55 – 12 volt, 55lb thrust, 54″ shaft, auto pilot, foot pedal-

RT70 – 24 volt, 70lb thrust, 54″ shaft, auto pilot, foot pedal-

For questions and ordering with phone the accessories department (08) 9309 4200 (7 days) or email accessories@allboatbusiness.com.au

 


WIRELESS COPILOT REMOTE CONTROL TO SUIT ABOVE

 

Wireless control featuring plug n play design for easy hook up. Suitable for corded PoweDrive and AutoPilot motors with round foot pedal plug (See photo on right).

Hand held remote control provides for:

• left/right steering

• speed up

• speed down

• on/off

All this is accessible from your fishing rod, wrist or belt utilizing the small wireless remote which is similar to a vehicle keyless entry remote that can take full command of your boat’s steering and speed control. Quick release rod
mounts allow rapid and easy transfer of remote from rod to rod. The CoPilot can be used with or without the corded foot pedal and provides finer steering adjustments than the corded foot pedal.

For questions and orderingwith phone the accessories department (08) 9309 4200 (7 days) or email accessories@allboatbusiness.com.au

 

 


RIPTIDE SALTWATER TERROVA I-PILOT

 

Our rugged new saltwater powerhouse features better performance, I-PILOT as standard and a new foot pedal option. New stow/deploy mechanism lets you move effortlessly in and out of the water. The terrova is available in 2 models only, a 12 volt 55lb and a 24 volt 80lb.

NEW ONE TOUCH LAUNCH BRACKET

Simply depress the handle and fall-away ramps effortlessly deploy the motor into the water. The balanced motor design makes stowing easy, and a special master cut-off switch automatically turns the power off when stowed

GO REMOTE WITH I-PILOT AS STANDARD

I-PILOT is a trolling motor control system which utilises GPS technology to automatically navigate and position the boat for anglers. This is a true breakthrough in trolling motor technology, as what better way is there to keep you on the fish than to have the trolling motor to
position the boat for you. This is the ultimate in hands free operation! This creates a new level of versatility for the angler and offers several features that have never been available before on a trolling motor. The Record a Track feature allows an entire track, up to a remarkable two miles in length, to be stored to memory for immediate retracing or a later return trip. As many as three different tracks can be recorded and stored at a time.

The I-PILOT system offers another groundbreaking innovation to anglers for the first time, Cruise Control. With Cruise Control, I-PILOT maintains real-time on the water boat speed in one-tenth mile per hour increments. This precise speed control allows the angler to dial in bait presentations in trolling applications.

Also included in the I-PILOT control system is the new GPS – based Advanced AutoPilot which utilises a series of waypoints to maintain a true heading while adjusting for wind, waves, current and side drift. Integrated into
the I-PILOT remote control is Minn Kota’s famous CoPilot Wireless trolling motor control system. With the standard remote, I-PILOT users will be able to control speed and steering from anywhere in the boat.

DIGITAL MAXIMIZER

Up to five times longer run time on a single charge. Standard on both Terrova models.

OPTIONAL FOOT PEDAL

A new design waterproof, low-profile foot pedal with 18’ cord offers precise control. You can activate AutoPilot as well as heel/toe or right/left steering, infinite speed adjustments and momentary/constant On/Off control. Sold
seperately.

MODELS

RT55 – 12 volt, 55lb thrust, 54″ shaft, INCLUDING I-PILOT -

RT80 – 24 volt, 80lb thrust, 54″ shaft, INCLUDING I-PILOT-

 

For questions and ordering with phone the accessories department (08) 9309 4200 (7 days) or email accessories@allboatbusiness.com.au

 


CORDED FOOT PEDAL TO SUIT TERROVA ABOVE

Take control of your saltwater Terrova motor with this optional foot pedal. Its low-profile design offers two steering options: heel/toe pedal or left/right steering buttons. It also includes a rotary speed control dial,
momentary/constant on toggle, AutoPilot on/off toggle and an 18′ cable with IP68-rated waterproof connector plug.

This pedal uses plug-n-play design for Terrova or Riptide ST motors, and works in conjunction with CoPilot.

 For questions and ordering with phone the accessories department (08) 9309 4200 (7 days) or email accessories@allboatbusiness.com.au
 


I-PILOT WIRELESS GPS TROLLING SYSTEM TO SUIT OLDER MODEL TERROVA AND POWERDRIVE MODELS

 
Minn Kota introduces I-PILOT, a trolling motor control system which utilises GPS technology to automatically navigate and position the boat for anglers. This is a true breakthrough in trolling motor technology, as what better way is there to keep you on the fish than to have the trolling motor to position the boat for you. This is the ultimate in hands free operation!I-PILOT integrates GPS technology into Minn Kota Riptide Saltwater Terrova, Riptide Saltwater PowerDrive and PowerDrive V2 bow mount trolling motors. This creates a new level of versatility for the angler and offers several features that have never been available before on a trolling motor. The Record a Track feature allows an entire track, up to a remarkable two miles in length, to be stored to memory for immediate retracing or a later return trip. As many as three different tracks can be recorded and stored at a time.

The revolutionary Spot-Lock feature works like an electric anchor, Holding the boat in place. If the boat drifts more than five feet from the Spot-Lock location, the I-PILOT will activate the trolling motor to keep the angler on the designated spot. It automatically corrects for wind, waves, current and drift. The “recall” feature for Spot-Lock provides the ability to return to that specific location at a later time. Up to three Spot-Lock locations can be stored at a time.

The I-PILOT system offers another groundbreaking innovation to anglers for the first time, Cruise Control. With Cruise Control, I-PILOT maintains real-time on the water boat speed in one-tenth mile per hour increments. This
precise speed control allows the angler to dial in bait presentations in trolling applications.

Also included in the I-PILOT control system is the new GPS – based Advanced AutoPilot which utilises a series of waypoints to maintain a true heading while adjusting for wind, waves, current and side drift. Integrated into
the I-PILOT remote control is Minn Kota’s famous CoPilot Wireless trolling motor control system. With the remote, I-PILOT users will be able
to control speed and steering from anywhere in the boat.

For questions and ordering with phone the accessories department (08) 9309 4200 (7 days) or email accessories@allboatbusiness.com.au

 


RIPTIDE SALTWATER ENGINE MOUNT

Our Engine Mount motors deliver all of the advantages of a Minn Kota motor without affecting your outboard or sterndrive performance. With enough thrust to push the heaviest runabout, deck boat or pontoon, our Engine
Mount series lets you fish anywhere, anytime. Three year warranty.

ANTI CAVITATION PLATE MOUNT

Will not compromise the performance of your outboard or sterndrive. Once on the plane the Minn Kota engine rides completely out of the water.

REMOTE SPEED CONTROL

The speed control unit can be used as a hand held or can be mounted in a convenient position to best suit the users application.

DIGITAL MAXIMIZER

Up to five times longer run time on a single charge. Standard on all three engine mount models.

URETHANE ENCAPSULATED ELECTRONICS

All Riptide control boards are fully encapsulated in marine grade urethane to form an impregnable barrier against the destructive effects of saltwater.

MODELS

 RT55 – 12 volt, 55lb thrust -

RT80 – 24 volt, 80lb thrust-

RT160 – 24 volt, 160lb thrust -


For questions and ordering with phone the accessories department (08) 9309 4200 (7 days) or email accessories@allboatbusiness.com.au

 


AVAILABLE ACCESSORIES

 

Quick Release Bracket Mounts:
 

Convenient, quick removal of any Riptide Autopilot, PowerDrive or PowerDrive AutoPilot trolling motor.

Features Locking Quick Release design for smooth and easy disconnect.

 


 

Battery Meter – Minn Kota:
Measures remaining charge in any 12 volt battery. LED readout can be easily read in sunlight. Takes the guess work out of estimating a charge. Compact and durable, fits into your pocket or tackle box.

 


 

Power Plug – Heavy
Duty 40 Amp:
 

Universal design for two or three wire configuration, 12-36 volt system.

Watertight sealing cap, corrosion resistant, plated brass electrical components.

Standard 28mm diameter mounting hole.

Locks into receptacle to provide a watertight seal. Ergonomic soft contoured grip for easy hook up and blade alignment.

 


 

Extension Handles:
 

Provides extended steering and speed control for Minn Kota hand control bow-mount, transom motors and small petrol outboards. Available in a choice of two fixed length extensions or a telescopic, adjustable length model. Simple installation, just slide over existing hand grip
and tighten down. Removable rubber sleeve allows installation on tillers from 45 to 36mm diameter.

460mm model -

760mm model-

Telescopic model-

 


 

Bow mount quick release bracket:
 

Allows for easy removal of any Riptide bow mount, autopilot motor. The low profile puck design leaves the deck clear when the motor is removed. Includes stainless steel hardware and locking pin, locking handle can be secured with padlock (not included).

 


 

Minn Kota BatteryChargers On-Board:
 

Suitable for permanent on-board mounting to eliminate the hassle of traditional portable chargers. Available in three models to suit single or dual battery bank installations and provide fully automatic, multistyle charging to properly maintain the batteries. By controlling the current and voltage during the charging cycle, Minn Kota chargers recharge faster than conventional automotive battery chargers while preventing over charging which can damage and shorten battery life. They include an automatic temperature compensation feature that adjusts the output voltage to assure the battery reaches its gassing threshold and
achieves a full charge. The temperature compensation feature also protects the batteries from “boiling” due to over charging at high temperatures.

• Fully Automatic Charging

MK210A & MK22 0A – 3 stage (bulk, absorption, maintenance)

• Automatic Temperature Compensation

Delivers fast charging recovery, even in extreme temperatures, while
protecting from over charging.

• LED Display

Indicates power on, charging, full charge and check connection.

• Waterproof, Shock and Vibration Resistant

Heavy duty construction, waterproof to IPX7

• Short Circuit, Reverse Polarity & Ignition Protected

A safety feature which prevents the charger from operating if
incorrectly connected to the battery

• Saltwater Tested

• For use with 12vdc/6 Cell Batteries

Suitable for 50-130 amp hour rated, flooded wet cell, maintenance free
or AGM batteries

(L= length, W = Width, H = height – all in mm)

MK210A – 240v input, 10Amp output, 2 outlet (L292xW190xH100) -

MK220A – 240v input, 20Amp output, 2 outlet (L338xW187xH100) -

 


 

Battery Charger Minn Kota Portable:
 

The new MK110PA 240 volt portable marine battery charger is designed to deliver a precise, proper charge to marine batteries without over or under charging as is often the case with standard automotive battery chargers. It utilises a multi-stage charging system; a feature not found on most portable chargers, to charge up to 50% faster than a single stage (bulk) 10amp portable charger, while properly protecting the batteries. Over charging can damage the useful life of the battery. Likewise under charging over time, will reduce the discharge time and shorten the battery life as much as 20%.

The fully automatic charging system utilises bulk, absorption and
maintenance cycles. It delivers 10 amps maximum charge in bulk mode until the voltage reaches the absorption level, at which point the
charger varies the power output to maintain voltage. Once the power
output drops to a preset level the charger goes into maintenance mode
maintaining the voltage at a lower level.

An LED display indicates power on, charging ,full charge and check
connection. The unit features short circuit and reverse polarity
protection, a safety feature which prevents the charger from operating
if improperly connected to the battery. It is suitable for use with
12V/6 cell batteries which are flooded wet cell, maintenance free or AGM
type only.

Dimensions:

Length: 178mm

Width: 229mm

Height: 197mm

Weight:2.9kg

MK110PA – 240 Volt input, 10Amp output -

 


 

Transducer Mounting Kit:
 

Fits most major sounder manufacturers transom mount transducers. Will fit all Minn Kota trolling motors.