Boat Fit Out – A Guide To Save You Money
A Bait Board is a system of securing a boater to a fixed or portable anchor or dock post. When properly used, a bait board will not only provide safe, effective gear but will also help save a boat’s Anchorage. The idea is that a boat owner who wants to be able to move their boat more easily or have more flexibility with the way they anchor will use a boat fitting out to secure their equipment to a fixed anchor or dock post. There are many different types of fittings available for these boards but essentially they are all used to hold a boat’s gear on to some type of support like a dock post or a boat trailer. The following are some of the common fittings used:
Rod Holders: The most commonly used type of fittings for a boat are the rod holders. These are normally referred to as bow holders or slip-ons. Most of the time a boater will have a number of different sized rods on hand. Sometimes these rods are different lengths like long rods and sometimes they will all be of the same length. In the event the number of rods is longer than six then the bow mount fittings may be used.
Some of the oldest models of boat fitting products used to be made from wood. Nowadays this has changed and the new technology of stainless steel bait board rod holders are gaining in popularity. These are much stronger than the wood versions and can be made to hold a wide variety of different sized fishing rods. They can be purchased in a variety of different colors and finishes. Some manufacturers still make their rods in wood but most use stainless steel in most of their modern designs. This makes them easier to maintain and use over time.
Boat Rod Holders: These are the most basic of the boat fitting products. These usually attach to a post which is placed on top of the bait boards. They provide a simple method of securing the rod to the boat.
Boat Fitting: The second type of boat fitting product is a system that fits the boat without the need for specialised tools or installations. This type of product requires the purchase of certain fittings. When you buy these fittings you should do so after the manufacturer has advised you of the size of the equipment that you require. The reason that they are usually recommended is because if they are too big the boat won’t be able to breathe. If the boat is under powered for instance, the power will be so low that the boat won’t be able to move properly. This means that your boat will be unable to operate safely in the water.
Boat Staysafe: One other type of product that is used in boat fitting is a boat safe. A boat safe is designed to keep important items out of the water when you aren’t using the boat. It prevents damage to valuable equipment and to your belongings. It is designed to fit over the entire boat interior so that items which could be damaged by the damage will not be visible. As it is waterproof as well as airtight as it can prevent damage to the interior of your boat whilst it is in the water.
Boat Window: Finally there is a product called a boat window which is specifically designed to cover a boat window. These products are extremely effective in preventing sunlight from entering through the boat windows. This way you can save money on your energy bills, even if you aren’t using the boat as much as you once did.
Boat fit outs are a great way to make your boat look as if it was newly purchased just arrived from the manufacturer. They are often very inexpensive when compared to buying a new boat from a dealership, especially if you buy a high quality product. Once you have completed one of these fittings you will see how easy they are to use and how efficient they are at saving you money on fuel. As you can see, there are many benefits of fitting your boat with one of these devices or a combination of products.